Curing Compound

Curing Compound

Send Inquiry

Owing to our rich knowledge as well as professional workforce, we have achieved a noted position as a trusted organization engaged in offering Curing Compound. It is used for spraying on freshly cast concrete or newly exposed concrete surfaces. To comply with set industrial norms, we use finest quality additives to process this compound. Curing Compound is useful for large areas of concrete such as pavements, runways and bridge decks. We offer this compound at affordable prices.


  • Forms moisture barrier
  • Minimizes risk of drying shrinkage
  • Non-toxic and nonflammable

Water based concrete curing compound


For spraying on freshly cast concrete, or newly exposed concrete surfaces after removal of form work, to form a temporary membrane which will retain sufficient moisture for effective curing to take place. Used for concreting generally but especially useful for large areas of concrete such as pavements, runways and bridge decks; also for vertical or sloping surfaces as on towers, chimneys, canal linings, columns and beams, where water curing is difficult or unreliable.


牋牋牋牋 Single application: Forms moisture barrier for whole of the curing period.

牋牋牋牋 No other curing necessary:牋 Eliminates use of water, hessian or sand, completely.

牋牋牋牋 Reliable: No risk of erratic or poor curing and ensures that cement hydrates efficiently.

牋牋牋牋 Ensures hard-wearing surface: Minimizes risk of drying shrinkage, cracks and dusty surfaces.

牋牋牋牋 Easy and sage spray application: Non-toxic and nonflammable.


REDICURE WB is a white, low viscosity wax emulsion which incorporates a special alkali reactive emulsion breaking system. This system ensures that the emulsion breaks down to form a non penetrating continuous film immediately upon contact with a cementitious surface. This impervious film prevents excessive water evaporation which in turn permits more efficient cement hydration, thus reducing shrinkage and increasing durability. Once formed, the membrane will remain on the concrete surface until eventually broken down and eroded by natural weathering. Where it is required to apply a further treatment to such concrete surface, it may be necessary to remove the membrane remaining after curing by wire brushing or other Mechanical means.

牋牋牋牋牋 The use of curing membranes on internal floor slabs is generally to be avoided where additional surface finishes are to be applied. REDICURE WB is however ideal where the concrete surface of a floor slabs is to be left as 'finished'.

Standards compliance:

Redicure WB gives 75% or greater curing efficiency when tested to BS 7542 and complies with BS 8110 Part 1, clause 6.6.3(c), ASTM C309 and AASHTO M148 as Type 1D.


  • Color Bulk liquid - White
  • Minimum application temperature - 100C