1:- SILICOREP S500 is used to provide water repellent surface with improved self cleaning properties on exterior building.
2:- Brick work , convrete , cement rendering , natural or cast stone.
1:- Brush or spray applied direct from container ,
2:- Equally effective on old or new surfaces,
3:- Unaffected by salt-laden atomosphere , reduces unsightly staining ,
4:- Risk of efflorescence is reduced
5:- Reduces causes of cracking and crazing in in-situ or precast concrete,
6:- Preserves natural colours and texture of created material .
1:- SILICOREP S500 penetrated into concrete for a minimum depth of penetration of 2mm.
1:- Repels rain wate and inhibits ingress of surface water provided there is not hydrostaic pressure.
1:- Permeability is low to water , salt solution , dusst and soot particles .
Leaching of soluble salts from brick work , which caused efflorescence, absorption of deicing salts by concrete which causes degradation and absorption of atmospheric dirt by brickwork , concrete and stone are all minimized.
Water Vapor release
SILICOREP S500 allows building surfaces to breathe naturally .
45 to 90 ftÂ² per lit (Depends on porposity of stone)
1 lit , 5 lit , 10 lit & 20 lit.
Pearl Plaza complex, Second Floor, B/h G.T Sheth School, 150 Ft Ring Road, Near KKV hall, Rajkot, Gujarat, 360005, India